EXHAUST BENDER/SWAGER 220V 1PH

Description

Features and Benefits:�For bending, the EB-300 exhaust bender comes with standard radius tooling from 1-1/2″ up to 3″ OD (for 2-1/4 to 3” OD tubing 12 gauge mild steel wall thickness is required).�The EB-300 exhaust pipe bender is considered a compression bender as it uses one large hydraulic ram to push the inside radius die into the compression assisted outside counter dies.�The outside dies have two hydraulic cylinders that applies pressure at the point of bend on the inside radius die.�The end result is that the machine can bend light gauge tubing without folding the material in half.�The EB-300 exhaust pipe bender requires 220 volts of single phase power is operated using knee controls, allowing hands to be kept free for material control.�This exhaust tube bender also comes equipped with tube end forming station.�This station includes tooling to expand, flare and swage the tubing. It also allows the operator to create ball joints and flanges.�The EB-300 exhaust tube bender comes filled with hydraulic fluid and has an oil sight glass to ensure the proper level is maintained at all times.�A useful tooling tray is standard as well so the tooling stays with the machine instead of getting lost in a busy auto shop.�Baileigh Industrial exhaust pipe benders are well built to last for decades of profitable production. For more information contact a Baileigh Industrial representative.Have an automotive repair shop that is constantly outsourcing your exhaust jobs because you don�t have the right tube bender for the job? If that is the case look, at theEB-300 exhaust benderfrom Baileigh Industrial. This just might be tool you need to add profitability back to your jobs. The EB-300 exhaust pipe bender comes with everything you need to get started.